Equipment operation and maintenance management system
1： Distribution equipment mainly refers to: 10KV drop out fuse, lightning arrester, distribution transformer, high and low voltage leads and their accessories, low-voltage distribution panel, metering and grounding devices, etc. as New energy cable Etc
2： Carefully collect the basic data of power distribution equipment, and establish and improve the equipment account. The account shall be true in content, accurate in data and complete in items.
3： The person in charge of equipment management shall be specified, and the power distribution equipment shall be inspected regularly according to the requirements of the relevant inspection and maintenance system. If any defect is found, it shall be handled in a timely manner according to the provisions of the equipment defect management system, eliminate the defect, and make detailed records to avoid accidents.
4： According to the equipment operation condition and relevant regulations, the maintenance plan of the distribution equipment shall be carefully formulated, the preventive test and maintenance of the equipment shall be carried out regularly, and the maintenance of the equipment shall be done well to protect the oil injection equipment from leakage and oil contamination.
5： Strictly implement the "Rural Low Voltage Electrical Safety Work Regulations" and the "Rural Safe Electricity Use Regulations", establish and improve the equipment operation system, carefully fill in the operation ticket before operation, ensure that one person operates and one person monitors, and ensure the safety of staff.
6： Outdoor power distribution equipment shall have obvious safety warning signs. All parts to be grounded shall be reliably grounded, and the grounding resistance shall meet the requirements of regulations.
7： The device of high and low voltage fuse must be equipped with a melt suitable for the rated current of the equipment. It is strictly prohibited to use other conductors instead to ensure the safety of the equipment.
8： The distribution transformer should not be overloaded. If the transformer is overloaded due to load change, it shall comply with the Operation Regulations for Power Transformers before continuing to operate.
9： The leakage protector should meet the requirements of its installation and operation procedures, carefully do a good job in the trial run of the leakage protector, make records, and develop in the new era power cable The industry is also changing with each passing day.
