contact us
Contact

Company name: Shandong Peninsula Cable Co., Ltd

Tel.: 0535-8621134

Mobile: 13688691898

Email: [email protected]

Q Q :1653178622

Website: www.bandaotable.cn

Address: Tonghai Road, High tech Development Zone, Longkou, Shandong

Your current location: home page >> Product Center >> power cable

Leshan Metal Sheathed Inorganic Mineral Insulated Cable

Detailed introduction

 Quotation of YTTW (BTTW) metal sheathed inorganic mineral insulated cable

I   YTTW (BTTW) metal sheathed inorganic mineral insulated cable Structure of

one     Cable conductor: stranded copper wires, with good bending performance

two     Insulation layer: high temperature resistant and non combustible inorganic insulation material

three     Copper sheath: copper material, with good bending characteristics after special processing, can be used as PE wire.

four     Outer sheath: low smoke, halogen-free and flame retardant plastic material with good corrosion resistance


 1509955950594667.jpg

III   YTTW Fire resistant copper characteristics of (BTTW) metal sheathed inorganic mineral insulated cables

one     According to the national standard, the fire resistance characteristic test of wire and cable combustion test method GB12666.6

A Class A burns at the flame temperature of 950 ℃, and 750V voltage is applied between phases and between phases and the outer protective conductor. The insulation is not damaged for 90min.

B Class A burns at the flame temperature of 750-800 ℃, and 750V voltage is applied between phases and between phases and the outer sheath. The insulation is not damaged for 90min.

two     According to British BS6387, Flexible fireproof cable It can meet the following requirements:

A Grade 650 ℃ 3h

B Grade 750 ℃ 3h

C Grade 950 ℃ 3h

S Grade 950 ℃ 20min

IV   YTTW Advantages of (BTTW) metal sheathed inorganic mineral insulated cable

one     Excellent fire resistance. The fire resistance rating not only meets the national standard GB12666.6 Class A 950 ℃, 90min, but also meets the requirements of British BS6387-1994 Class A, 650 ℃ 3h; Class B 750 ℃ 3h; Class C 950 ℃ 3h requirement; At the same time, it can withstand water spray and mechanical impact during combustion.

two     The continuous length is long, whether it is single core or multi-core cable, its length can meet the demand of power supply length, and each continuous length can reach more than 1000 meters;

three     Large cross-section, single core cable cross-section can reach 630mm2, multi-core cable cross-section can reach 240mm2;

four     With flexibility, the cable can be coiled on the cable reel, and its bending radius is 6-10D, (D is the outer diameter of the cable)

five     When burning, it is smokeless and non-toxic. It is made of inorganic materials (non combustible materials), which will not produce any harmful gas and secondary pollution, so it can be called an environmental friendly green product;

six     The overload capacity is large. The cable not only has a large current carrying capacity, but also has an excessive overload capacity. According to the wiring requirements, when the surface temperature of the cable is generally ≤ 70 ℃, if the wiring cannot be touched or contacted with combustible building materials, the temperature of the cable sheath can be increased to 105 ℃. When overloaded Fireproof cable The long-term working temperature can reach 250 ℃.

seven     Corrosion resistant, organic insulated fire-resistant cable sometimes needs to pass through plastic pipe or iron pipe. The plastic pipe is prone to aging and embrittlement, and the iron pipe is prone to rust. The fire-resistant cable has a copper sheath and does not need to pass through the pipe. The copper sheath has good corrosion resistance;

eight     There is no electromagnetic interference. When the fireproof cable is laid in the same shaft with the information and control wires, it will not interfere with the information transmitted by the signal and control wires and cables under the shielding of the copper sheath;

nine     Good safety. The fireproof cable can supply power normally in the flame, start the fire extinguishing equipment, reduce fire losses, and is particularly reliable for life safety. Its copper sheath is an excellent conductor, the best grounding PE line, and continues to the full length of the cable, greatly improving the sensitivity and reliability of grounding protection.

ten    Long service life, high temperature of inorganic insulation material, and not easy to aging, its service life is many times higher than that of organic insulation cable, and under normal working conditions, its service life can reach more than 100 years;

eleven    Packaging, transportation, installation and accessories of flexible fireproof cables are similar to ordinary cables, which are relatively simple;

twelve    Good economy. Due to advanced manufacturing technology and simple installation, the comprehensive cost of flexible fireproof cable is significantly lower than that of mineral insulation under the same conditions.

V   YTTW (BTTW) Electrical characteristics of metal sheathed inorganic mineral insulated cables.

one     Rated voltage: 750V

two     Rated working voltage: light load 500V, heavy load 750V;

three     Rated current: single core 25A-1800A, multi-core 16A-500A;

four     Insulation resistance: insulation resistance ≥ 1000M Ω· km. The cable length is less than 100m, and the insulation resistance is ≥ 10000M;

five     Voltage test: the 500V cable is applied with an AC voltage of 2000V, the 0.6/1kV cable is applied with an AC voltage of 3500V, and the AC voltage is applied for 15min without breakdown, and the whole panel (circle) is applied with an AC voltage for 5min without breakdown.

VI   YTTW (BTTW) Manufacturing standard for metal sheathed inorganic mineral insulated cables

Construction Industry Standard of the People's Republic of China JG/T313-2014

Metal sheathed inorganic mineral insulated cable and terminal with rated voltage of 0.6/1kV and below

VII   YTTW Application scope of (BTTW) metal sheathed inorganic mineral insulated cable

one     Power supply for fire-fighting equipment and fire elevators in various buildings.

two     Power supply for equipment and lighting system in important buildings or densely populated buildings.

three     Places with high ambient temperature, such as steel plants, smelters and other equipment power supply.

four     Power supply for equipment in important inflammable and explosive occasions, such as petrochemical industry, smelter, etc.

five     Places requiring special sanitation, such as hospitals, schools, video factories and other power supply equipment.

six     Power supply for important military, national defense, aerospace and health base equipment.

7. Power supply for important equipment such as power plant and nuclear power plant.


Related labels: Specification of YTTW (BTTW) metal sheathed inorganic mineral insulated cable , Model of YTTW (BTTW) metal sheathed inorganic mineral insulated cable , Quotation of YTTW (BTTW) metal sheathed inorganic mineral insulated cable

Recent browsing:

Related products:

Related news:

contact us

Shandong Peninsula Cable Co., Ltd

Tel.: 0535-8621134

Q        Q:1653178622

Email: [email protected]

Address: Tonghai Road, High tech Development Zone, Longkou, Shandong

 New energy cable 1522035370290487.png