上海贵族宝贝交流_上海千花坊_夜上海品茶分享

Label search results: 4 products, 6 news

[ Industry News ] Safety requirements At present, the safety of electric vehicles has become the focus of the industry

In the process of use, the cable of the charging post will be frequently stretched and bent or rolled by the electric vehicle and other external mechanical damage, so this also requires that the cable of the charging post meet special mechanical performance requirements, such as winding, bending, vehicle rolling test, etc. This product can reliably control and transmit the signals of electric pressure, current, etc. during the charging process, which is resistant to high and low temperatures, electromagnetic interference Anti
Published on: November 16, 2018 Clicks: 190

[ technical knowledge ] Differentiation between good and bad cables of charging piles

Differentiation between good and bad cables of charging piles: during charging of charging piles, the voltage and current of vehicles should also be controlled. The charging cables should be resistant to high voltage, high temperature, electromagnetic interference, stable signal transmission, oil resistance, water resistance, acid and alkali resistance, UV resistance and other characteristics to ensure the stability and safety of charging. During the charging process, the cable should be often dragged and squeezed, and the product has high flexibility,
Published on: September 13, 2018 Number of hits: 301

[ technical knowledge ] Use requirements of charging post cable

The charging pile shall be able to charge the electric vehicle safely and automatically. The charging pile can dynamically adjust the charging parameters, execute corresponding actions and complete the charging process according to the data provided by the BMS of the electric vehicle. The charging post has an input device for external manual control, which can set the parameters of the charging post. The charging pile shall be equipped with AC meter and DC meter with accuracy no less than 0
Published on: February 13, 2018 Clicks: 717

[ Company News ] How to Select the Cable of Charging Post for New Energy Vehicles

The standard electric vehicle DC charging pile is commonly known as "fast charging". During the charging process, the input voltage of the DC charging pile is three-phase four wire AC380V ± 15%, the frequency is 50Hz, and the output is adjustable DC, which directly charges the power battery of the electric vehicle. It can meet the requirements of fast charging; The standard electric vehicle AC charging pile is commonly known as&
Published on: December 25, 2017 Clicks: 192

[ Industry News ] Conditions to be overcome for charging pile cable

The conditions that need to be overcome by the charging pile cable The electric power products are environmentally friendly and pollution-free in the use process. The electric endurance of electric vehicles requires many outdoor charging piles to complete. For purely electric vehicles, the charging pile is an addition to these vehicles
Published on: December 22, 2017 Number of hits: 614

[ technical knowledge ] Technical specification for charging pile cable

1. Charging pile cable conductor - number of cores: 2,3,4,5 with or without signal control wire - conductor belongs to Class 6 in EN60228 - tinned or not tinned - recommended wire section: 0,5; 1; 1,5； 2,5； 4； 6； 10； 16mm2 2. Suitable materials are allowed to be used for cable isolation layer of charging pile
Published on: December 5, 2017 Clicks: 443