1、 Technical standards for export cables: IEC, British standard, American standard and other advanced standards are generally required for foreign high-temperature wires and cables, so it is not enough to be familiar with domestic standards, but also with international standards. 2、 Outlet cable laying conditions: the environmental conditions in West Asia, Southeast Asia and other regions are special, for example, the extreme maximum temperature in some regions is 50 ℃, and the maximum daily average temperature is 40 ℃. Therefore, the technical data should pay attention to the description of technical parameters related to the environment (such as the correction factor of carrying capacity). 3、 High temperature wire and cable structure of export cable: due to the laying environment of high temperature wire and cable, the structure of high temperature wire often has some additional requirements in addition to meeting the standard requirements. Therefore, enterprises should pay attention to the design and manufacturing of high temperature wire. 4、 Packaging of high temperature wires and cables for export cables: For high temperature wires and cables for export, the delivery tray is generally of large coil or steel coil structure, and is completely sealed with iron sheet or wooden strip. In addition to the reel length of high-temperature wire and the minimum allowable bending radius, the size of the container should also be considered. Strictly follow the order requirements. As the packaging of export high-temperature lines is more complicated than that of domestic ones, it will affect the cost and delivery date of high-temperature lines. Therefore, attention should be paid to when signing contracts. 5、 Other precautions for exporting cables: before shipment, provide users with the main technical parameters, sectional drawings, laying instructions and other data of high-temperature wires and cables, and test reports. Technical data shall be complete; The manufacturing length of high-temperature wires and cables shall be strictly controlled, and the delivery length error shall be minimized. All export products shall pass the inspection of the State Administration for Commodity Inspection, and a commodity inspection certificate shall be issued.
