-
The conditions that need to be overcome by the charging pile cable The electric power products are environmentally friendly and pollution-free in the use process. The electric endurance of electric vehicles requires many outdoor charging piles to complete. For purely electric vehicles, the charging pile is an addition to these vehicles
Published on: December 22, 2017 Number of hits: 648
-
Photovoltaic cable is a kind of wire produced by using advanced radiation crosslinking process and low smoke halogen-free flame retardant materials. It has the advantages of high temperature resistance, ozone resistance, ultraviolet resistance, water vapor resistance, microorganism resistance, strong short-term overload capacity, long life, wear resistance, oil resistance, corrosion resistance, high tensile strength, etc., and can be widely used in solar power stations, photovoltaic systems, etc
Published on: December 20, 2017 Number of hits: 341
-
Compared with YTTW metal sheathed inorganic mineral insulated fire-proof cable and BTTZ mineral insulated cable and halogen-free low smoke fire-resistant cable, there are two popular fire-proof cables in the market at present: BTTZ one uses copper core mineral rim copper tube sheath structure, which has the advantage that it is a non combustible cable due to the use of all inorganic structure, and the cable service temperature can be increased
Published on: December 19, 2017 Number of hits: 198
-
Advantages of flexible fireproof cable 1. Excellent fireproof performance, the fire resistance rating not only meets the international GB12666.6 Class A 950 ℃, 90min (also meets the requirements of British BS6387-1994 Class A 650 ℃ 3h; Class B 750 ℃ 3h; Class C 950 ℃ 3h); At the same time, it can withstand water spraying during combustion
Published on: December 18, 2017 Number of hits: 175
-
1. Operating environment characteristics of wind power cable: long-term outdoor operation, vertical suspension laying, frequent torsion (automatic yaw against wind), contact with oil (part), seawater corrosion (special environment). 2. Requirements for wind power cable: high mechanical strength, torsion resistance (soft), vibration resistance, oil resistance, etc. In addition, cables used in cold areas should also be resistant to low temperature (- 40 ℃). three
Published on: December 14, 2017 Number of hits: 228
-
Warmly celebrate that the company won the bid of package 3 and package 13 of State Grid Shandong Province and package 13 of State Grid Anhui Province in November, totaling 60 million yuan. The winning of the bid of State Grid is a reflection of the company's further development, and also shows that the Peninsula Cable has been recognized by the State Grid, which reflects the strength and level of the company from another aspect. Shandong Peninsula Cable Co., Ltd. www b
Published on: December 13, 2017 Number of hits: 213
-
What's the difference between new energy cables and ordinary wires and cables? New energy cables are often heard that people around them call all power lines wires, in which power cables are also unified. Strictly speaking, this is not correct. There are many differences between cables and wires in size, structure, use and characteristics, so they cannot be confused. 1. Difference between materials
Published on: December 11, 2017 Number of hits: 212
-
Mining cables are divided into armored cables, rubber sheathed cables and plastic cables. 1. Armored cable The so-called armored cable is armored with steel wire or steel tape. Its biggest advantages are high insulation strength and strong tensile resistance, so the steel wire armored cable is suitable for vertical shaft or steeply inclined roadway, and the steel belt armored cable is suitable for horizontal roadway or gently inclined roadway
Published on: December 9, 2017 Number of hits: 240
-
Recently, the Ministry of Housing and Urban Rural Development successfully reviewed and passed two recommended national standards for wires and cables for construction in Jinan, which for the first time stipulated that the service life of wires and cables should not be less than 70 years. The new cable standard clearly requires that civil buildings with a height of more than 100 meters must use low smoke halogen-free A-grade flame retardant wires and cables. In addition, it is also mandatory to use environment-friendly cables in major construction. Since 199
Published on: December 8, 2017 Clicks: 182
-
The computer cable belongs to the cable for electrical equipment. This cable is applicable to electronic computers and automatic instruments with rated voltage of 500V and below that have high requirements for anti-interference. According to the use requirements of different environments and equipment, the cable insulation can be made of polyethylene, polyvinyl chloride, cross-linked polyethylene, fluoroplastic, silicone rubber and other materials. Minimum ambient temperature for conventional computer cable laying
Release time: 2017-12-07 Number of hits: 147
-
Photovoltaic cable: It is designed according to the complex and changeable use environment of photovoltaic power station, and can meet the laying and operation requirements of photovoltaic power station. 185387294998 The use of dedicated photovoltaic cables in photovoltaic power stations, especially at the DC side, can effectively reduce the occurrence of quality problems. Photovoltaic cable shall be resistant to solar ultraviolet radiation, high and low temperature characteristics, high and low temperature characteristics, acid, alkali and salt fog
Published on: December 6, 2017 Number of hits: 231
-
1. Charging pile cable conductor - number of cores: 2,3,4,5 with or without signal control wire - conductor belongs to Class 6 in EN60228 - tinned or not tinned - recommended wire section: 0,5; 1; 1,5； 2,5； 4； 6； 10； 16mm2 2. Suitable materials are allowed to be used for cable isolation layer of charging pile
Published on: December 5, 2017 Number of hits: 492
270 in total 12 entries per page Page: 19/23
